Consulting

Advice and guidance are a natural part of our delivery
– for your and your employees’ safety.

Fall prevention, fall arrest, collective safety, EN standards, pendulum effect, etc. – the list is long and the significance is enormous.

We are familiar with the concepts and legislation regarding work at height, and we take pride in providing the best safety solution for your needs.

As a fall protection provider, we can provide the full package, ranging from inspections and maintenance of equipment to courses in the use of fall protection and rescue after a fall.

Requirements and legislation for ladders

All our ladders comply with the applicable legislation EN 131 according to their construction and use. We place particular emphasis on ladders that serve as access routes to an above- or below-level area, where the purpose of access involves operating machinery, e.g. maintaining ventilation systems on roofs or accessing a process plant. A wide range of requirements are set regarding these access conditions, which are based on the EN ISO 14122 standard. In some cases, these requirements correspond to the Danish Labour Inspection’s guidance B1.3-1, while in other respects they are significantly higher.

EN ISO 14122 includes, among other things:.

  • If the height exceeds 3000 mm, the wall must have back braces or equivalent safety devices installed. With equivalent safety devices, we refer to fixed wire or beam systems that provide the user with individual fall protection.
  • At heights less than 3000 mm, risks are assessed if access is from a plateau, with the possibility that the user could fall further down.
  • That lifeline ropes should have a size between 650 and 800 mm. This ensures the possibility of rescue, as smaller rope sizes make it difficult to reach a person who is hanging.
  • The exit from the ladder must be between 500 and 700 mm, and the ladder must be at least 1100 mm higher than the exit step.
  • If the distance between the top step and the building/structure exceeds 75 mm, this must be covered with a non-slip wooden step to prevent the user from stepping between the ladder and the building.
  • At the end of the ladder, the user must be ensured, either via a safety gate or guardrail, a minimum of 1500 mm on each side of the ladder or 2000 mm into the roof surface.
  • That for every 6000 mm the load-bearing rail must be equipped with a rest platform, either in the form of a mounted swing platform on the rail or the rail must be designed so that, at 6-meter intervals, the rail shifts with a platform between it.

Do you need advice?

If you are a customer of Safework, the advice will be included in the delivery. 

If you only need advice or questions regarding the use of fall protection or height safety, i.e. as a service, we offer advice for 1250 DKK (ex VAT) per hour.

This means that you will be billed for the telephone advice you receive from us. If the advice results in an order, the amount for the advice will be credited to you.

Contact me regarding advice

Inspection of equipment

According to Danish legislation, all fall protection equipment must be inspected at least every 12 months. This applies to both personal equipment and fixed installations and anchor points.

It is important that the company that inspects the equipment has the appropriate certificates for the various systems and equipment, and that they have broad professional knowledge in the field. In this way, you can be sure that the equipment you put into use is approved in accordance with the manufacturer's instructions.

Courses

According to. AT guidance from the Danish Labour Inspection Authority, It is an imperative requirement that the user must have instructions on the use of fall protection equipment and be instructed in a plan for rescue in the event of a fall accident.

Our courses provide the student with knowledge about legislation, the composition of equipment, and various rescue options. We hold the course at your location and base our training on the equipment and work situations that suit your everyday routine.

We hold the following courses:

  • Practical use of fall protection equipment
  • Altitude navigation, theory and practice
  • Elevation training - refreshes the course
  • Fall protection - refreshes course
  • Safety briefing at construction sites
Safework Aps
Handwerkstraße 6
6920 Videbæk

Follow us

We are a creditworthy company based on the Bisnode credit rating system. The assessment is made based on a number of different decision-making rules. The information is updated daily via the Bisnode database. The credit rating of the company is therefore always up to date.
© Safework 2025