The right access solution

Why choose an EN 14122-4 approved joint over a specially manufactured welded joint?

When access to roofs, platforms, machinery or intermediate levels is to be established, many companies face a choice: Should one purchase a finished, documented scaffold that has been designed according to EN ISO 14122-4, or should one have a local blacksmith company manufacture a bespoke scaffold?

At first glance, the specially manufactured solution may seem like the cheapest and easiest choice. But many overlook critical points in this choice, and when looking at the entire responsibility – safety, construction, documentation, assembly, control, and future use – the picture is completely different.

A gate designed and documented according to EN ISO 14122-4 provides the company with a much greater assurance that the access route is well thought out and suitable for its intended purpose.

A non-slip exit step installed on a fixed ledge according to the EN 14122-4 standard.

The standard is about more than just the leader itself

EN ISO 14122 is a series of standards for permanent access routes to machines and industrial installations. The series includes, among other things, stairs, work platforms, guardrails and barriers, gangways and fixed access solutions.

The essential point is that the standard is not just about whether a fetus can carry a person.

A wide range of factors are required that are important for the user's safety. These may include the dimensions of the seat, steps, distances, access conditions, construction, attachment, ergonomics, and fall protection measures.

This means that a professionally designed EN 14122 solution is developed based on a comprehensive safety assessment – and not just based on what can be produced in a welding workshop.

“It can just be welded”

It is of course possible to manufacture a torch in steel or aluminum at a blacksmith shop. There is not necessarily anything wrong with that.

The problem arises if one assumes that a properly welded structure is automatically a safe and legal access route.

Many companies are exceptionally skilled at fabricating steel structures, but that does not necessarily mean that the company has conducted a complete assessment of the requirements for a permanent access route.

A child must be assessed, among other things, in relation to:

  • the geometry on the lever
  • step width and distance between steps
  • distances to surrounding structures
  • access to and from the carrier
  • risk of falling
  • need for a safety bar or other fall protection
  • attachment points
  • loads in the structure
  • materials and corrosion
  • Welds and their quality
  • anchoring in the existing structure
  • Inspection and maintenance
  • documentation of the construction

It’s not enough to ask: “Can we weld a joint?”

The right question is:  “Can we document that this passage is a safe and suitable permanent access route?”

EN 14122-4 approved ladder with a back brace mounted on a brick wall for roof access.

It's also about the employer's responsibility

When employees must use a fixed route as a means of access, the employer has a responsibility to ensure that working conditions are safe.

A homemade or specially manufactured ladder is not necessarily illegal. However, the company must be able to document that it meets the relevant requirements regarding quality, safety, and the working environment.

Security should not be an experiment

A permanent ladder is part of the access system of the building or installation. It can be used by many different people over many years, and is an investment in safety. And yet, access solutions that put the user’s safety to the test are still seen in many places, even when the user first steps onto the ladder. Incorrect step spacing, round steps, too small a distance from the wall, very small handrails, etc. An EN 14122-4 approved ladder is tested and tested in terms of comfort, distance and size of handrails, safe exit to the roof and the possibility of rest platforms or cross-overs to provide the user with a safe break during the ascent.

A professional solution gives peace of mind

When you choose an EN 14122 access solution, you are in fact buying more than just the product itself.

You buy:

  • Security.
  • Documentation.
  • Thoughtful construction.
  • Predictable quality.

A solution that has been developed for permanent access, and with the price at the right place.

A forged lever can be both strong and beautiful. But the strength of a construction is not necessarily the same as the safety of using it as a means of access.

What matters is whether the entire solution is designed and documented for the purpose for which it is intended. And ultimately, a standard crane is often cheaper than a custom-made one, plus assembly can often be done without a crane and heavy lifting, with the associated risk of errors and damage.

Fixed skylight with a ridge beam mounted on the facade according to the EN 14122-4 standard for safe access.

Part of the article

Relevant articles

© Safework 2025